Actors in CARLA are the elements that perform actions within the simulation, and they can affect other actors. Actors in CARLA includes vehicles and walkers and also sensors, traffic signs, traffic lights and the spectator. It is crucial to have full understanding on how to operate on them.

This section will cover spawning, destruction, types, and how to manage them. However, the possibilities are almost endless. Experiment, take a look at the tutorials in this documentation and share doubts and ideas in the CARLA forum.

• Blueprints
  • Managing the blueprint library
• Actor life cycle
  • Spawning
  • Handling
  • Destruction
• Types of actors
  • Sensors
  • Spectator
  • Traffic signs and traffic lights
  • Vehicles
  • Walkers

---

Blueprints

These layouts allow the user to smoothly incorporate new actors into the simulation. They are already-made models with animations and a series of attributes. Some of these are modifiable and others are not. These attributes include, among others, vehicle color, amount of channels in a lidar sensor, a walker's speed, and much more.

Available blueprints are listed in the blueprint library, along with their attributes. Vehicle and walker blueprints have a generation attribute that indicates if they are a new (gen 2) or old (gen 1) asset.

Managing the blueprint library

The carla.BlueprintLibrary class contains a list of carla.ActorBlueprint elements. It is the world object who can provide access to it.

blueprint_library = world.get_blueprint_library()

Blueprints have an ID to identify them and the actors spawned with it. The library can be read to find a certain ID, choose a blueprint at random, or filter results using a wildcard pattern.

# Find a specific blueprint.
collision_sensor_bp = blueprint_library.find('sensor.other.collision')
# Choose a vehicle blueprint at random.
vehicle_bp = random.choice(blueprint_library.filter('vehicle.*.*'))

Besides that, each carla.ActorBlueprint has a series of carla.ActorAttribute that can be get and set.

is_bike = [vehicle.get_attribute('number_of_wheels') == 2]
if(is_bike)
    vehicle.set_attribute('color', '255,0,0')

Attributes have an carla.ActorAttributeType variable. It states its type from a list of enums. Also, modifiable attributes come with a list of recommended values.

for attr in blueprint:
    if attr.is_modifiable:
        blueprint.set_attribute(attr.id, random.choice(attr.recommended_values))

---

Actor life cycle

Spawning

The world object is responsible of spawning actors and keeping track of these. Spawning only requires a blueprint, and a carla.Transform stating a location and rotation for the actor.

The world has two different methods to spawn actors.

• spawn_actor() raises an exception if the spawning fails.
• try_spawn_actor() returns None if the spawning fails.

transform = Transform(Location(x=230, y=195, z=40), Rotation(yaw=180))
actor = world.spawn_actor(blueprint, transform)

The actor will not be spawned in case of collision at the specified location. No matter if this happens with a static object or another actor. It is possible to try avoiding these undesired spawning collisions.

• map.get_spawn_points() for vehicles. Returns a list of recommended spawning points.

spawn_points = world.get_map().get_spawn_points()

• world.get_random_location() for walkers. Returns a random point on a sidewalk. This same method is used to set a goal location for walkers.

spawn_point = carla.Transform()
spawn_point.location = world.get_random_location_from_navigation()

An actor can be attached to another one when spawned. Actors follow the parent they are attached to. This is specially useful for sensors. The attachment can be rigid (proper to retrieve precise data) or with an eased movement according to its parent. It is defined by the helper class carla.AttachmentType.

The next example attaches a camera rigidly to a vehicle, so their relative position remains fixed.

camera = world.spawn_actor(camera_bp, relative_transform, attach_to=my_vehicle, carla.AttachmentType.Rigid)

Once spawned, the world object adds the actors to a list. This can be easily searched or iterated on.

actor_list = world.get_actors()
# Find an actor by id.
actor = actor_list.find(id)
# Print the location of all the speed limit signs in the world.
for speed_sign in actor_list.filter('traffic.speed_limit.*'):
    print(speed_sign.get_location())

Handling

carla.Actor mostly consists of get() and set() methods to manage the actors around the map.

print(actor.get_acceleration())
print(actor.get_velocity())

location = actor.get_location()
location.z += 10.0
actor.set_location(location)

The actor's physics can be disabled to freeze it in place.

actor.set_simulate_physics(False)

Besides that, actors also have tags provided by their blueprints. These are mostly useful for semantic segmentation sensors.

Destruction

Actors are not destroyed when a Python script finishes. They have to explicitly destroy themselves.

destroyed_sucessfully = actor.destroy() # Returns True if successful

---

Types of actors

Sensors

Sensors are actors that produce a stream of data. They have their own section, 4th. Sensors and data. For now, let's just take a look at a common sensor spawning cycle.

This example spawns a camera sensor, attaches it to a vehicle, and tells the camera to save the images generated to disk.

camera_bp = blueprint_library.find('sensor.camera.rgb')
camera = world.spawn_actor(camera_bp, relative_transform, attach_to=my_vehicle)
camera.listen(lambda image: image.save_to_disk('output/%06d.png' % image.frame))

• Sensors have blueprints too. Setting attributes is crucial.
• Most of the sensors will be attached to a vehicle to gather information on its surroundings.
• Sensors listen to data. When data is received, they call a function described with a Lambda expression (6.14 in the link provided).

Spectator

Placed by Unreal Engine to provide an in-game point of view. It can be used to move the view of the simulator window. The following example would move the spectator actor, to point the view towards a desired vehicle.

spectator = world.get_spectator()
transform = vehicle.get_transform()
spectator.set_transform(carla.Transform(transform.location + carla.Location(z=50),
carla.Rotation(pitch=-90)))

Traffic signs and traffic lights

Only stops, yields and traffic lights are considered actors in CARLA so far. The rest of the OpenDRIVE signs are accessible from the API as carla.Landmark. Their information is accessible using these instances, but they do no exist in the simulation as actors. Landmarks are explained more in detail in the following step, 3rd. Maps and navigation.

When the simulation starts, stop, yields and traffic light are automatically generated using the information in the OpenDRIVE file. None of these can be found in the blueprint library and thus, cannot be spawned.

Traffic signs are not defined in the road map itself, as explained in the following page. Instead, they have a carla.BoundingBox to affect vehicles inside of it.

#Get the traffic light affecting a vehicle
if vehicle_actor.is_at_traffic_light():
    traffic_light = vehicle_actor.get_traffic_light()

Traffic lights are found in junctions. They have their unique ID, as any actor, but also a group ID for the junction. To identify the traffic lights in the same group, a pole ID is used.

The traffic lights in the same group follow a cycle. The first one is set to green while the rest remain frozen in red. The active one spends a few seconds in green, yellow and red, so there is a period of time where all the lights are red. Then, the next traffic light starts its cycle, and the previous one is frozen with the rest.

The state of a traffic light can be set using the API. So does the seconds spent on each state. Possible states are described with carla.TrafficLightState as a series of enum values.

#Change a red traffic light to green
if traffic_light.get_state() == carla.TrafficLightState.Red:
    traffic_light.set_state(carla.TrafficLightState.Green)
    traffic_light.set_set_green_time(4.0)

Vehicles

carla.Vehicle is a special type of actor. It incorporates special internal components that simulate the physics of wheeled vehicles. This is achieved by applying four types of different controls:

• carla.VehicleControl provides input for driving commands such as throttle, steering, brake, etc.

    vehicle.apply_control(carla.VehicleControl(throttle=1.0, steer=-1.0))

• carla.VehiclePhysicsControl defines physical attributes of the vehicle and contains two more controllers:

  • carla.GearPhysicsControl which controls the gears.
  • carla.WheelPhysicsControl which provides specific control over each wheel.

    vehicle.apply_physics_control(carla.VehiclePhysicsControl(max_rpm = 5000.0, center_of_mass = carla.Vector3D(0.0, 0.0, 0.0), torque_curve=[[0,400],[5000,400]]))

Vehicles have a carla.BoundingBox encapsulating them. This bounding box allows physics to be applied to the vehicle and enables collisions to be detected.

    box = vehicle.bounding_box
    print(box.location)         # Location relative to the vehicle.
    print(box.extent)           # XYZ half-box extents in meters.

The physics of vehicle wheels can be improved by enabling the sweep wheel collision parameter. The default wheel physics uses single ray casting from the axis to the floor for each wheel but when sweep wheel collision is enabled, the full volume of the wheel is checked against collisions. It can be enabled as such:

    physics_control = vehicle.get_physics_control()
    physics_control.use_sweep_wheel_collision = True
    vehicle.apply_physics_control(physics_control)

Vehicles include other functionalities unique to them:

• Autopilot mode will subscribe a vehicle to the Traffic Manager to simulate real urban conditions. This module is hard-coded, not based on machine learning.

    vehicle.set_autopilot(True)

• Vehicle lights have to be turned on and off by the user. Each vehicle has a set of lights listed in carla.VehicleLightState. Not all vehicles have lights integrated. At the time of writing, vehicles with integrated lights are as follows:
  • Bikes: All bikes have a front and back position light.
  • Motorcycles: Yamaha and Harley Davidson models.
  • Cars: Audi TT, Chevrolet Impala, both Dodge police cars, Dodge Charger, Audi e-tron, Lincoln 2017 and 2020, Mustang, Tesla Model 3, Tesla Cybertruck, Volkswagen T2 and the Mercedes C-Class.

The lights of a vehicle can be retrieved and updated anytime using the methods carla.Vehicle.get_light_state and carla.Vehicle.set_light_state. These use binary operations to customize the light setting.

# Turn on position lights
current_lights = carla.VehicleLightState.NONE
current_lights |= carla.VehicleLightState.Position
vehicle.set_light_state(current_lights)

Walkers

carla.Walker work in a similar way as vehicles do. Control over them is provided by controllers.

• carla.WalkerControl moves the pedestrian around with a certain direction and speed. It also allows them to jump.
• carla.WalkerBoneControl provides control over the 3D skeleton. This tutorial explains how to control it.

Walkers can be AI controlled. They do not have an autopilot mode. The carla.WalkerAIController actor moves around the actor it is attached to.

walker_controller_bp = world.get_blueprint_library().find('controller.ai.walker')
world.SpawnActor(walker_controller_bp, carla.Transform(), parent_walker)

Each AI controller needs initialization, a goal and, optionally, a speed. Stopping the controller works in the same manner.

ai_controller.start()
ai_controller.go_to_location(world.get_random_location_from_navigation())
ai_controller.set_max_speed(1 + random.random())  # Between 1 and 2 m/s (default is 1.4 m/s).
...
ai_controller.stop()

When a walker reaches the target location, they will automatically walk to another random point. If the target point is not reachable, walkers will go to the closest point from their current location.

A snipet in carla.Client uses batches to spawn a lot of walkers and make them wander around.

---

That is a wrap as regarding actors in CARLA. The next step takes a closer look into the map, roads and traffic in CARLA.

Keep reading to learn more or visit the forum to post any doubts or suggestions that have come to mind during this reading.